Side Control Buttons; Rear View Mounting Pattern - Sceptre X23 User Manual

Side Control Buttons

Rear View Mounting Pattern

Mounting Specification: 100mm x 100mm using screw M4 (12mm) diameter screws.
POWER – Turn on the TV by pressing
the button once. Press the button
again to turn off the TV.
SOURCE – This button switches
between all the different sources of the
TV. The switching sequence is as
follows: TV, AV, S-Video, YPbPr, VGA,
and HDMI. When the OSD is active,
this button acts as the enter button
and confirms the menu selection.
MENU – This button activates the On
Screen Display (OSD). If a sub-menu
is active, pressing this button will
return selection to the previous menu
level.
CH(▲/▼) – These buttons change the
TV channel up or down. If the OSD is
active, these buttons function as up or
down controls for the menu.
VOL(+/-) – These buttons increase or
decrease the TV's volume. If a sub-
menu is active, pressing these buttons
will move the selection left or right.
- 11 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual