If You Have Cable Or Antenna Through Vcr - Sceptre X32 User Manual

If You Have Cable or Antenna through VCR...

1. Make sure the power of X32 LCD HDTV is turned off.
2. Make sure there is an antenna or cable connection to the VCR
already.
3. Use a Coaxial RF cable and connect from your VCR's Antenna Out
or Output to TV to the ATSC/NTSC port off the back of your X32
LCD HDTV.
4. Turn on X32 LCD HDTV.
5. Select TV (Air) for antenna or TV (Cable) for digital cable from either
your remote control's source button or source button on the right side
of the TV.
6. Use the On Screen Display to scan for channels.
Please Note :
•
•
•
Some VCRs require you to turn it on before its output will
have a signal to the TV. Please consult your VCR manual
for further reference.
Not all broadcasts are in High Definition (HD). Please refer
to your local broadcasting stations for more information.
The X32 LCD HDTV's tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot
achieve that signal level with your antenna or cable, your
X32 LCD HDTV might lose picture or sound.
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
- 24 -