Yamaha S70XS Reference Manual page 77

Q
This varies the signal level at the "Freq" (Frequency) setting to create various
frequency curve characteristics. The higher the setting, the smaller the bandwidth.
The lower the setting, the greater the bandwidth.
Settings:
0.1 – 12.0
NOTE:
When the Shape parameters of the Low and High are set to "shelv," the
"Q" parameters of Low and High are not available.
7 Effect
1 Chorus Return
Determines the Return level of the Chorus Effect. This parameter can be
changed via the Knob directly.
Settings:
0 – 127
2 Chorus Pan
Determines the pan position of the Chorus effect sound.
Settings:
L63 (far left) – C (center) – R63 (far right)
3 Chorus To Reverb
Determines the Send level of the signal sent from the Chorus Effect to the Reverb Effect. The higher the value, the
deeper the Reverb that is applied to the Chorus-processed signal.
Settings:
0 – 127
4 Reverb Return
Determines the Return level of the Reverb Effect. This parameter can be changed via the Knob directly.
Settings:
0 – 127
5 Reverb Pan
Determines the pan position of the Reverb effect sound.
Settings:
L63 (far left) – C (center) – R63 (far right)
6 Chorus
7 Reverb
8 Master
When the cursor is located here, pressing the [ENTER] button calls up the Effect Parameter display.
Effect Parameters
Switch
Determines whether or not the Master Effect can be used. This parameter cannot be selected from this display. When
the Arpeggio/Effect Function is set to "EFFECT ON/OFF," you can turn each effect on/off via the Function buttons.
Category
Type
From the Category column, you can select one of the Effect Categories, each of which contains similar Effect types.
From the Type column, you can select one of the Effect Types listed in the selected Category.
Settings:
Details about the Effect categories and the Effect types are described on
NOTE:
The "Category" is not edited in the Reverb and the Master effect parameter display because there is only one Reverb/Master
category.
Preset
This lets you call up pre-programmed settings for each Effect type, designed to be used for specific applications and
situations.
You can change how the sound is affected by the selected pre-programmed settings.
NOTE:
For a list of the Effect presets, see the Data List (separate PDF documentation).
Reference Manual
+
0
–
Frequency
page 16.
Reference
Basic Structure
0.1
12.0
Voice
Performance
Frequency
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Performance
Play
Mixing
Edit Select
Common Edit
Name
Play Mode
Arpeggio
Controller
Filter / EG
EQ
Effect
Parameter
A/D Out
A/D FX
Parameter
Part Edit
Voice
Play Mode
Arpeggio
Arp Edit
Arp 1-5 Type
Filter / EG
3 Band EQ
Rcv Sw
FX Send
Job Select
Recall
Bulk
Copy
Initialize
Supplementary Info.
Appendix
77