Yamaha S70XS Reference Manual page 119

2 Note
From this display you can set the pitch- and keyboard-related parameters
for each Zone — allowing you to set up Zone splits and determine the
pitch range for each Zone.
Octave (Octave Shift)
Determines the amount in octaves by which the range of the Zone is
shifted up or down. You can adjust the offset up or down over a maximum
range of three octaves.
Settings:
-3 – +0 (Default) – +3
Transpose
Determines the amount in semitones by which the range of the Zone is shifted up or down.
Settings:
-11 – +0 (Default) – +11
Note Lmt Lo (Note Limit Low)
Note Lmt Hi (Note Limit High)
Determines the lowest and highest notes of the range for each Zone.
Settings:
C -2 – G8
NOTE:
You can also set the Note directly from the Keyboard, by holding down the [SHIFT] button and pressing the desired key.
3 Preset
From this display you can make the Voice-related settings for each Zone
which will be transmitted as MIDI messages automatically when the
Master is selected.
Bank MSB (Bank Select MSB)
Bank LSB (Bank Select LSB)
PC (Program Change Number)
Determines the Voice-related settings for each Zone in the selected Master. The selected Voices depend on the external
MIDI devices.
Settings:
Bank MSB (Bank Select MSB): 000 – 127
Bank LSB (Bank Select LSB): 000 – 127
PC (Program Change): 001 – 128
Volume
Determines the Volume settings for each Zone in the selected Master.
Settings:
000 – 127
Pan
Determines the Pan settings for each Zone in the selected Master.
Settings:
L64 – C – R63
MIDI Send Sw (MIDI Send Switch)
Determines whether the MIDI message is transmitted (on) or not when setting the parameters on this display. When set
to "on," changing the value in this display transmits the corresponding MIDI messages to an external/internal tone
generator.
Settings:
off, on
NOTE:
Note that this setting automatically returns to off at power-off.
Reference Manual
Reference
Basic Structure
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Master
Play
Edit Select
Common Select
Name
Memory
Zone Sw
Zone Edit Select
Transmit
Note
Preset
Knob/Slider
Job Select
Bulk
Initialize
Appendix
119