Yamaha S70XS Reference Manual page 45

Chorus To Reverb
Determines the Send level of the signal sent from the Chorus Effect to the Reverb Effect. The higher the value, the
deeper the Reverb that is applied to the Chorus-processed signal.
Settings:
0 – 127
Reverb Send
Adjusts the reverb send level. The higher the value, the more pronounced the Reverb. This parameter can be changed
via the Slider directly.
Settings:
0 – 127
Reverb Return
Determines the Return level of the Reverb Effect. This parameter can be changed via the Knob directly.
Settings:
0 – 127
Reverb Pan
Determines the pan position of the Reverb effect sound.
Settings:
L63 (far left) – C (center) – R63 (far right)
Element Out 1 – 8
Determines which Insertion Effect (A or B) is used to process each individual Element on the S90 XS/S70 XS Editor. The
"thru" setting lets you bypass the Insertion Effects for the specified element.
Settings:
thru (through), ins A (Insertion A), ins B (Insertion B)
Ins A (Insertion Effect A)
Ins B (Insertion Effect B)
Vocoder
Chorus
Reverb
When the cursor is located here, pressing the [ENTER] button calls up the Effect Parameter display.
Effect Parameters
Switch
Determines whether or not the Master Effect can be used. This parameter cannot be selected from this display.
Category
Type
From the Category column, you can select one of the Effect Categories, each of which contains similar Effect types.
From the Type column, you can select one of the Effect Types listed in the selected Category.
Settings:
Details about the Effect categories and the Effect types are described on
NOTE:
You need not set the "Category" in the Reverb or the Vocoder parameter display because these Effects have only one category
respectively.
Preset
This lets you call up pre-programmed settings for each Effect type, designed to be used for specific applications and
situations. You can change how the sound is affected by the selected pre-programmed settings.
NOTE:
For a list of the Effect presets, see the Data List (separate PDF documentation).
Effect Parameter 1 – 16
For fine adjustment of the effect parameters.
The effect parameter differs depending on the currently selected effect type. Refer to
Effect parameters. For a complete list of the available Effect Types for each Effect block, refer to the Effect Type List in
the Data List (separate PDF documentation).
NOTE:
The Vocoder parameters include 1 to 32.
Reference Manual
page 16.
page 19 for details about the
Reference
Basic Structure
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Voice
Play
Normal Voice Edit
Common Edit
Name
Play Mode
Arpeggio
Arp Edit
Arp 1-5 Type
Controller
LFO
Filter/EG
3 Band EQ
Effect
Element Edit
OSC
Tune
PEG
Filter Type
FEG
Filter Scale
AMP Level/Pan
AEG
AMP Scale
LFO
EQ
Drum Voice Edit
Common Edit
Name
Play Mode
Arpeggio
Controller
Filter/EG
3 Band EQ
Effect
Key Edit
OSC
Tune
Filter Type
AMP Level/Pan
AEG
EQ
Job
Recall
Bulk
Supplementary Info.
Appendix
45