Yamaha S70XS Reference Manual page 155

 Are the parameter settings such as Element Switch, Part Switch, Note Limit and
Velocity Limit appropriate?
[VOICE]  [EDIT]  [MUTE] (lighting)  Number [9] – [16] buttons
[PERFORM]  [PART ON/OFF]
[PERFORM]  [EDIT]  Part selection  Play Mode  Note Limit Lo/Hi
[PERFORM]  [EDIT]  Part selection  Play Mode  Velocity Limit Lo/Hi
 When the Performance/Multi produces no sound, has a Voice been assigned to each
Part?
[PERFORM]  [EDIT]  Part selection  Voice
[MULTI/SEQ PLAY] (selecting Multi mode)  [EDIT]  Part selection  Voice
 When the Performance/Multi produces no sound, is the output setting of each Part set
appropriately?
[PERFORM]  [EDIT]  Part selection  Play Mode  Output Select
[MULTI/SEQ PLAY] (selecting Multi mode)  [EDIT]  Part selection  Play Mode  Output Select
 When the Multi produces no sound, are the output port/channel of each track in the
external sequencer and the receive channel of each Part in the Multi set appropriately?
[MULTI/SEQ PLAY] (selecting Multi mode)  [EDIT]  Part selection  Voice  Receive Ch
 When the Performance/Multi produces no sound, is the "Arpeggio Play Only"
parameter of each Part turned on?
[PERFORM]  [EDIT]  Part selection  Voice  Arp Play Only
[MULTI/SEQ PLAY] (selecting Multi mode)  [EDIT]  Part selection  Voice  Arp Play Only
No sound from the MIC INPUT jack
 Is the microphone switch turned on?
 Is the cable between the microphone and the synthesizer properly connected?
 Is the [MIC ON/OFF] button set to on (lamp lights)?
 Is the INPUT GAIN knob turned fully counter-clockwise (to the minimum)?
 Are the volume settings of the A/D Input Part too low?
Selecting "MIC" via the Knob Function button  VOLUME knob
 Are the effect settings appropriate?
[UTILITY]  Voice  A/D FX
[PERFORM]  [EDIT]  Common  A/D FX
[MULTI/SEQ PLAY] (selecting Multi mode)  [EDIT]  Common  A/D FX
 Is the output setting of the A/D Input Part set appropriately?
[UTILITY]  Voice  A/D Out  Output Select
[PERFORM]  [EDIT]  Common  A/D Out  Output Select
[MULTI/SEQ PLAY] (selecting Multi mode)  [EDIT]  Common  A/D Out  Output Select
Split does not work via the external MIDI device
 The settings of the "Split Sw" parameter and "Split Lower/Upper" parameter in the
Performance mode work only when playing the keyboard of the instrument itself.
(page 69)
(page 81)
(page 141)
(page 79)
(page 141)
Reference Manual
(page 82)
(page 83)
(page 101)
(page 83)
(page
(page 81)
(page 29)
(page 99)
(page 78)
(page
Appendix
Basic Structure
Functional Blocks
Tone Generator
A/D Input
Arpeggio
Sequencer
Audio Record/Play
Controller
Effect
Internal Memory
Reference
Voice
Performance
(page 103) Multi
SEQ Play
Master
Remote
101)
File
Audio Rec/Play
Utility
(page 101) Appendix
About MIDI
Display Messages
Troubleshooting
99)
155