Fiery KM-C3130 Job Management Manual page 42

2
2-16 Introduction to Command WorkStation
Menu Command
Server Log In/Log Out
Setup
Manage Color
Manage Font
Restart Server
Reboot Server
Clear...
Submenu command
Job Log
Server
Description
Allows you to log in or log out of the Fiery S300 and add
and remove Fiery S300 servers from the list.
Opens the Setup options for the Fiery S300 currently
selected in the Active Jobs window.
Opens ColorWise Pro Tools. For more information, see the
Color Guide.
Allows you to download fonts to the Fiery S300 currently
selected in the Active Jobs window. You can also delete fonts
currently resident on the Fiery S300.
Allows you to restart the Fiery S300 currently selected in the
Active Jobs window, without shutting down the Fiery S300
hard disk. This command is available only if you are logged
in as Administrator.
N : After you restart the Fiery S300, you may need to log
OTE
in to the Fiery S300 again to reestablish the connection.
Allows you to restart the Fiery S300 currently selected in the
Active Jobs window, after shutting down the Fiery S300 hard
disk. This command is available only if you are logged in as
Administrator.
N : After you restart the Fiery S300, you may need to log
OTE
in to the Fiery S300 again to reestablish the connection.
Clears the contents of the job log for the Fiery S300
currently selected in the Active Jobs window.
Clears all jobs in all Fiery S300 queues, all jobs archived on
the Fiery S300 hard disk, all FreeForm masters, the index of
FreeForm masters (in the FreeForm panel), and the index of
archived jobs (in the Archive panel).