Table of Contents
Advertisement
Photo 2: Front view of amplifier
CONNECTION – Mains
Both amplifiers have an IEC mains inlet socket. Use the supplied mains cable to connect
the unit to the local mains supply. The mains fuse and a spare is located in the inlet
socket fuse drawer. The mains cable must be removed to access the fuse or fuses.
Special Note – Make sure that all connection are tight and clean. For best results use
good quality audio interlinks. Although several companies make good quality interlinks
those manufactured by Audio Note give the best performance with Audio Note Amplifiers.
USING THE AMPLIFIERS
Once all the connections are completed and checked, turn on the amplifiers by using the
rocker switch located on the rear top right of the back panel just above mains inlet socket.
The amplifier requires approximately two minutes initializing time before it is ready for
operation. During this time ensure that the volume control on your preamplifier is at the
minimum setting.
A new amplifier requires about 200 hours of initial use (called "bedding in time") before
the circuitry becomes stable and optimum performance is realized. As the amplifier "beds
in" the sound will become increasingly smoother, detailed and open. Once the amplifier
MANUAL-ZZ209
4
Advertisement
Table of Contents
Need help?
Do you have a question about the Quest and is the answer not in the manual?
Questions and answers