Module Interfaces - Enterasys X-Pedition XSR-1805 Owner's Manual

The software image is contained in a single file with the power-up
diagnostics. It is based on the Nortel Open IP design model and runs on
top of the VxWorks operating system.
The modules are intended to meet overall FIPS 140-2 Level 2
requirements (see Table 2).
Section
1
2
3
4
5
6
7
8
9
10
11

Module Interfaces

The XSR-1805 provides a number of physical ports:
• Two 10/100BaseT FastEthernet LAN ports
• One console port
• Two PCM slots
• One PCMCIA slot for the optional CompactFlash card
Enterasys Networks
© Copyright 2003
This document may be freely reproduced and distributed whole and intact including this Copyright Notice.
Section Title
Cryptographic Module Specification
Cryptographic Module Ports and Interfaces
Roles, Services, and Authentication
Finite State Model
Physical Security
Operational Environment
Cryptographic Key Management
EMI/EMC
Self-tests
Design Assurance
Mitigation of Other Attacks
Table 2 – Intended Level Per FIPS 140-2 Section
Page 8 of 25
Level
2
2
2
2
2
N/A
2
2
2
2
N/A