Specifications; Model Numbers; Systems - Exmark METRO Operator's Manual

Specifications

Specifications

Model Numbers

Serial Nos: 920,000 and Higher
MG16KA322P; MG16KA322PCA; MG16KA362; MG16KA362CA; MG16KA362P; MG16KA483;
MG16KA483CA; MG16KA483P

Systems

Engine
• Engine Specifications: See your Engine Owner's
Manual
• Engine Oil Type: Exmark 4–Cycle Premium
Engine Oil
• RPM: Full Speed: 3600 (No Load)
Idle: 1550 RPM
Fuel System
• Capacity: 5.0 gal. (18.9 L)
• Type of Fuel: Regular unleaded gasoline, 87
octane or higher; containing no more than 10%
methanol or ethanol.
• Fuel Filter: Replaceable In-line
• Fuel Shut-Off Valve: 1/4 turn increments
Safety Interlock System
Operator must have the transmission in neutral and
PTO disengaged to start engine. Release of Operator
Presence Control (OPC) levers will cause engine to
stop if transmission is not in neutral and/or PTO
is engaged.
Steering/Brake Controls
Fingertip drive control levers provide independent
control of traction, braking, and neutral to each drive
wheel for moving, stopping, and power turning.
Parking brakes are engaged by locking drive control
levers in the "brake" position.
Transmission
• Peerless 700-070A, five speeds forward and one
reverse.
• Speed range:
– 1st: 2.0 mph (3.22 km/hr)
– 2nd: 2.7 mph (4.35 km/hr)
– 3rd: 3.5 mph (5.63 km/hr)
– 4th: 4.1 mph (6.60 km/hr)
– 5th: 6.2 mph (9.98 km/hr)
– Reverse: 3.1 mph (4.99 km/hr)
Wheel Drive System
Banded double A-Section V-belts, single top-side
idlers and replaceable bolt-on drive sheaves and brake
drums. (Single B-Section V-belts for the 32 inch
Model)
Tires & Wheels
Pneumatic (Air-Filled)
32
Quantity 2
Tread Turf Saver
Size 13 x 5.00-6
Ply Rating 4
Pressure 14 psi
(97 kPa)
Bearings
Replaceable
Ball
12
Front
Drive
Caster
Semi-
Pneumatic
36 & 48
All Decks
2 2
Turf Master Smooth
13 x 6.50-6 9 x 3.50-4
4
14 psi
(97 kPa)
Replaceable Replaceable
Ball Roller