Setting Mobile Unit Coding - Miele G 7823 Operating Instructions Manual

Automatic mobile unit recognition (Optional)
Mobile unit coding strip
15 different codes can be set. They are
assigned to programme places 1 to 15.
Under "System function, Selector switch
organisation" the matching
programmes have to be put into the
first 15 programme places.
Programme Bit
place 1
- 0
1 I
2 0
3 I
4 0
5 I
6 0
7 I
8 0
9 I
10 0
11 I
12 0
13 I
14 0
15 I
The coded total must be an even
number.
The settings on Bit 6 (WAK) are not
included in this calculation.
If the coded total gives an odd number,
the message CHECK MOBILE UNIT
RECOGNITION appears.
If the mobile unit code equals 0, the
message NO MOBILE UNIT
RECOGNITION appears. In neither
case can the programme be started,
The mobile unit recognition function
must be re-set.
Bit 2 Bit 3 Bit 4
0 0 0
0 0 0
I 0 0
I 0 0
0 I 0
0 I 0
I I 0
I I 0
0 0 I
0 0 I
I 0 I
I 0 I
0 I I
0 I I
I I I
I I I

Setting mobile unit coding

To set or alter the coding of a mobile
unit with automatic recognition (AWK),
proceed as follows:
Bit 5
Parity
Bit
0
I
I
0
I
0
0
I
I
0
Unscrew the track with AWK (using
0
an allen key) and remove from the
I
retainer.
0
I
I
0
Remove the magnetic strip from the
track.
21