Transfer trolley for loading and
unloading the machine
When a disinfection process is
being carried out according to
nationally laid down hygiene
standards (e.g. § 18 IfSG), the
contaminated surfaces of the trolley
must be disinfected, after the
machine has been loaded, using a
spray disinfectant in accordance
with national health and safety
regulations and § 18 IfSG.
Disinfecting agents listed by DGHM
(German institute for microbiology
and hygiene) are also suitable.
The height of the transfer trolley can be
adjusted using the feet.
The height should be set so that the
open machine door is held underneath
the side catches on the transfer trolley.
If the machine is not fitted on a plinth
the position of the foot pedal on the
transfer trolley may need to be
changed.
Areas of application
Unscrew foot pedal
Loosen counter nut
screw
.
Screw adjusting screw
the foot pedal, so that the stopping
point is reached earlier.
Re-secure the adjusting screw.
Screw the foot pedal back on.
.
on adjusting
further into
31