Table of Contents
Advertisement
Evolution MK-425C/449C/461C Advanced User Guide
Viewing The Contents Of A Memory
Right-click on a memory to view the contents. Please note that it is not possible to edit
the contents of a memory. The Sys Ex librarian will simply allow you to rearrange the
order of memories, or copy memories between one dump and another. The screen shot
shown below shows the first memory of a memory dump from a 425C with the factory
defaults.
Saving A Setup
Once you have named all your presets, and organised them in the desired order, click
'save' to save the content.
Alternatively you can click on the File menu and select save to save the file with the
previously assigned file name, or save as to assign the memory dump a new file name.
The shortcut key to save is CTRL+S.
Make sure you give the file a name which allows you to quickly identify your collection of
setups.
Loading A Setup
To load a memory setup file back in to the librarian, click on the 'Load' button and select
the required file. The loaded preset setups will appear in the Edit Window. You can then
either send it directly to the Evolution device by clicking send, or edit it.
Alternatively, select Open from the File menu.
The shortcut key for loading is CTRL+O
Future Development Of The Librarian
We strongly recommend you register your ownership of the Evolution Librarian if you
would like to be kept informed about future development. As you can see from the version
number, the software is at an early version 1.0 stage and we will continue to work on
enhancements for the software.
To register your copy, please visit www.evolution.co.uk/register
18
Hide quick links:
Advertisement
Table of Contents
