Setting Up The Librarian Software
Before you start using the Librarian, check that the MK-425C/449C/461C has been
selected as input and output device.
1.
Select MIDI Setup from the Options menu.
2.
Ensure the USB driver for you MK-425C/449C/461C is selected in the
"Inputs" Column.
If you are using native drivers this may be named "USB Audio Device".
1.
In the "Outputs" column, select the USB driver for you MK-425C/449C/461C
If you are using native drivers this may be named "USB Audio Device".
You should now be ready to use the Librarian software with you Evolution keyboard.
Librarian Overview
As you can see from the screenshot of the Librarian on page 16, you can save, load,
receive or send the complete content to and from either Bank columns.
To transmit the complete content of your MK-425C/449C/461C to the librarian,
simply press the "Receive" button on the Librarian software.
This process can only be completed successfully if the USB drivers for your keyboard
have been selected correctly, as described in the "Setting Up The Librarian Software"
section.
Once you have Received data from the keyboard, the memories are displayed in the
column.
Organising Presets Received From A Device
You can name the memories as you like. To re-name a memory, double-click on the
memory. You can then move memories around by dragging them to a new position, or
using the copy buttons between the two windows.
These buttons are defined below:
Will copy the selected memory in Bank 2 to Bank 1.
Will copy the selected memory in Bank 1 to Bank 2.
Will copy all memories in Bank 2 to Bank 1.
Will copy all the memories in Bank 1 to Bank 2.
Will undo the last copy you made. Only the last copy is remembered.
It's a good idea to decide which column is your master column, to avoid confusion and
maybe loosing hours of work.
Evolution MK-425C/449C/461C Advanced User Guide
17