Advertisement
ASSEMBLY
CONNECT
BATTERY
(See Fig. 2)
CAUTION:
0o not short battery termi-
nals.
Before
connecting
battery, re,,
move
metat
bracelets;
wristwatch
bands, rings, etc.
Positive terminal
must be connected
first to prevent sparking
from acc!den-
ta_ grounding.
o
Lift hood to raised position.
*
Open terminal access doors, remove terminal protec*
tive caps and discard,
if this battery is put into service after month and year
indicated on label (label located between terminals)
charge battery for minimum of one hour at 6-10 amps.
=
First connect RED battery cable to positive (+) battery
terminal wittl hex bolt, flat washer, lock washer and hex
nut as shown. Tighten securely.
o
Connect BLACK grou,_,ding cable to negative (-) battery
terminal with remaining
hex bolt, flat washer, lock
washer and hex nut° Tighten securely.
o
Close termhai access doors.
Use terminal access doers for:
Inspection for secure connections
(to tighten hard*
ware).
o
Inspec'_on for corrosion.
,
Testing battery.
o
Jumping (if required).
Periodic charging.
LOCK
FLAT
HEY, NUT
WASHER
WASHER
D!ISOARD TtSR!P_NAL
'\\
/
HEX
PROTECTIVE CAPS
k
BOLT
_
POSITIVE
(RED)
CABLE
NEGATWE
(BLACK)
CABLE
iNSTALL
SEAT (See Fig.3)
Adjust seat before tightening adjustment knob.
e)
Remove cardboard packing on seat pan.
Place seat on seat pan and assemble shoulder bolt.
Assemble adjustment knob and flat washer loosely.
Do not tighten.
Tighten shoulder bolt securely.
Lower seat into operating position and sit on seat.
Slide seat until a comfortable position is reached which
allows you to press clutch/brake
pedal all the way
down.
o
Get off seat without moving its adjusted position,
o
Raise seat and tighten adjustment knob securely,
SEAT
SEAT PAN
SHOULDER
BOLT
/
ADJUSTMENT
KNOB
FLAT
WASHER
FiG. 3
CHECK TiRE PRESSURE
The tires on your tractor were overinflated at the factory for
shipping purposes.
Correct tire pressure is important for
best cutting performance.
Reduce tire pressure to PSI shown in "PRODUCT
SPECIFICATIONS"
on page 3 of this manual.
CHECK
BRAKE
SYSTEiVI
After you learn how to operate your tractor, check to see
that the brake is properfy adjusted.
See "TO ADJUST
BRAKE" in the Service and Adjustments
section of this
manual.
FiG. 2
8
Advertisement
