Telephoning; Switching The Cordless Phone On And Off; Making A Call - Ericsson BS120 User Manual

Telephoning

Switching the cordless phone on
and off
While the cordless phone is switched on it is in stand-by
mode, the batteries are in use. With fully charged batteries,
the cordless phone can operate for about 110 hours in stand-
by mode. If you are not using the cordless phone to make or
receive calls you can put the cordless phone in the home base
station, or turn the cordless phone off.
To switch the cordless phone on
• Press the On key for one second.
To switch the cordless phone off
• Press then Off.
You cannot turn the cordless phone off during a call.
If the cordless phone is off and you are called, the ring
signal on the home base station still works. Press On
for one second to switch on the cordless phone, then
to receive the call.
14

Making a call

To make a call, use the
alternative method, is described later.
To make a call in the usual way:
1. Press and wait for the dial tone.
2. Dial the number and wait for a connection.
3. Press again to end the call.
The duration of the call is displayed.
key. Pre-dialling, an