Advertisement
_1,
WARNING:
When servicing use only Identical
Craftsman replacement parts. Use of any other
parts may create a hazard or cause product damage.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, carbon dust, etc.
_1= WARNING:
Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating oils,
etc. come in contact with plastic parts. They contain
chemicals that can damage, weaken, or destroy
plastic.
Do not abuse power tools. Abusive practices can damage
tool as well as workpiece.
Only the parts shown on parts list, page 9, are intended to
be repaired or replaced by the customer. All other parts
should be replaced by a qualified service technician at an
authorized service facility.
_i
WARNING:
Do not attempt to modify this tool or
create accessories not recommended for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
BATTERIES
The battery pack is equipped with 2 nickel-cadmium
rechargeable batteries. Length of service from each
charging will depend on the type of work you are doing.
The batteries have been designed to provide maximum
trouble free life. However, like all batteries, they will
eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry,
could result in a serious burn.
To obtain the longest possible battery life, we suggest the
following:
•
Store and charge battery pack in a cool area.
Temperatures above normal room temperature will
shorten battery life.
•
Never store battery pack in a discharged condition.
Recharge it immediately after it is discharged.
•
All batteries gradually lose their charge. The higher
the temperature the quicker they lose their charge. If
you store your tool for long periods of time without
using it, recharge the battery every month or two. This
practice will prolong battery life.
To preserve natural resources, please
recycleor disposeof properly.
This product contains nickel-cadmium
batteries. Local, state or federal laws
may prohibit disposal of nickel-cadmium
batteries in ordinary trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
BATTERY
REMOVAL,
PREPARATION
FOR
RECYCLING
See Figure 6.
TO REMOVE:
•
Lock switch trigger by sliding the lock button fon_'ard.
See Figure 2.
•
Remove battery pack from mini driver by depressing
tabs located on battery pack then pull on battery pack
in the direction of the arrow as shown in figure 6.
TAB
8
BAI'FERY
PACK
TAB
Fig. 6
_1, WARNING:
Upon removal, cover the battery pack's
contacts with heavy duty adhesive tape. Do not
attempt to destroy or disassemble battery pack or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of propedy.
Also, never touch both contacts with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
Advertisement
