Advertisement
'W
YOUR MINI DRIVER
=igure 1,
e attempting to use your mini driver, familiarize
elf with all operating features and safety
"ements.
NARNING:
Carefully read through this entire owner's
nanual before using your new miniddver. Pay close
tttention to the Rules For Safe Operation, Warnings
]nd Cautions. If you use your mini driverproperly and
_nlyfor what it is intended, you will enjoy years of safe,
eliable service.
DUCT SPECIFICATIONS:
DRIVER
315.111250 (Bed)
315.111260 (Blue)
let
1/4 in.
tor
DC Motor 2.4 Volt
itch
Reversible
Load Speed
375 RPM
<imum Torque
1.7 in. Ibs.
:IGER
ITEM NO. _-11021 (981892-001)
ut
120 V, 60 Hz, AC only
zrging Voltage
2.4 Volt
zrge Rate
8-10 Hours
"ERY PACK
ITEM NO. 9-11119 (981957-001)
BAI"FERY PACK
SWITCHLOCK
RONT
OVER
SWITCHON / OFF
FORWARD / REVERSE
COLLET
SWITCH
LOCK
See Figure 1.
The switch can be locked in the off position. This feature
can be used to prevent the possibility of accidental
starting when not in use and also allows you to use mini
driver manually. To lock switch, slide lock button forward.
To unlock switch, pull back on button,
Note: Your mini driver will not break a tight screw loose.
To break a tight screw loose, lock switch on mini driver
then manually turn screw to loosen.
WARNING:
Battery tools are always in operating
condition. Therefore, switch should always be locked
when not in use or carrying at your side.
SWITCH
To turn mini driver on, depress switch button located on top
of housing.Release switchbutton to turn mini driveroff.
REVERSIBLE
The switch button that turns your mini driver on and off
also changes the direction of rotation of the bit from
forward to reverse.
_1= CAUTION:
To prevent gear damage, always allow
bit to come to a complete stop before changing the
direction of bit rotation.
CHARGER
The charger has been designed to plug directly into outlet.
As shown in figure 1, battery pack easily fits in charger for
charging.
RGER
BA'I-rERY
PACK
Fig. 1
6
Advertisement
