Of The Surface - Bosch NES 730 UC Use And Care Manual

NE$ Cooktop Use and Care Manuam Cooktop Operating instructions
Cooktop Operating Instructions
BEFORE USJNGTHE COOKTOP
FORTHE FJRSTTJME
Remove all packing materials and literature from
the cooktop surface.
While cool, wipe with a clean, damp sponge and
dry.
" Apply the Cool<top
Cleaning Creme @
packaged
with the cool<top. Buff with a clean cloth. (See
Page 9 for daily care instructions.}
There may be a slight odor during the first several
uses; this is normal and will disappear.
° Optimum cooking results depend on the proper
cool<ware being selected and used. (See Page 7.)
° The cooking surface will hold the heat and remain
hot up to 25 or 30 minutes after the elements
have been turned off.
° Read all safety precautions and Use and Care
Manual information prior to operating.
Precautions for Long Life and Good Appearance of
the Surface
Regular, daily care using the Cool<top Cleaning
Creme will protect the surface and make it easier
to remove food soil and water spots.
" The ceramic glass cooking surface is a durable
material resistant to impact but not unbreakable
if a pan or other object is dropped on it.
° Do not use aluminum foil directly on the glass; it
will melt and damage the glass surface.
Do not allow plastic, paper, or cloth to come in
contact with the hot glass surface; these items can
melt or burn and damage the glass surface.
Do not allow pans to boil dry. This can damage
the pan, dement and/or the cooktop.
" Never cool< food directly on the glass.
" Avoid placing a wok support ring, trivet or other
metal stand on the glass surface.
Do not use the glass surface as a cutting board.
Do not slide cookware across the cooking surface;
it may scratch the glass.
Do not place wet pans on the glass surface.
Genera[ Operation of Cooktop
The cooktop uses touch pads and a magnetic dial to
operate the cooktop.When touching the glass of a touch
pad, such as an dement or function pad, use the flat
part of the finger and touch the center of the pad. A
beep will sound when touching any of these pads.
rnTwisT Dial
The cod<top uses a mTwisT magnetic dial to select
the desired heat setting. The inTwisT dial is held onto
the cool<top by a strong magnet and automatically
positions itself in the center of the dial location when
placed on the cooktop.
Note: If the dial is removed from the cooktop when
in use, all elements will be turned off. The cool<top is
locked and the Panel Loci< light comes on. (See Setting
Panel Loci< on Page 6.)
E[ement'ON' indicator Light
The area above the dement touch pad being used
will show the cool< setting when the dement is on.
When the element is turned off, the hot surface
indicator comes on in this area. (See Hot Surface
Indicator Light below).
Hot Su_ace indicator Light
Each element features a hot indicator light to show
when the cooking surface is too hot to touch. A
letter
H will appear
above
the element touch pad.
The light remains on until the cooking area has cooled to a
safe-to-touch temperature.
Ifa hot surface light is on, use caution when working or
cleaning around the cooktop as the cooktop is still hot_
H o2
Left Rear
Left Front
Right Rear
U
tl
Right Front
Retained Heat
The glass cooking surface retains heat and stays hot
after the element(s) have been turned off. The retained
heat may be used to hold foods at serving temperatures
for a short time.
PAGE 4