Beach, Ca - Bosch NES 730 UC Use And Care Manual

NE$ Cooktop Use and Care Manuam Cooktop Care and Maintenance
Troubleshooting
Before ca[ling for service, check these suggestions to avoid unnecessary service charges.
QUEST|ON SUGGESTED $OLUT|ONS
Element cycles on the highest , This is normal The temperature [imiter operates
setting automatically to protect the glass ceramic surface
from extreme high temperature damage.
Element cycles more than usual
Pan base is warped and not making full contact with
the heating surface.
Base diameter of pan is too small for the size of the
element.
Pan ingredients have boiled dry.
Material of pan is a poor heat conductor; heat
transfers too slowly
A slight odor is not:iceab[e when an o This is normal with new cooktops and will disappear
element is turned on after several uses.
Cooktop controls wi[[ not turn on
Replacement razor blades for the
scraper
Cooking results are not what was
expected
Replacement
cooktop
inTwisT dial for
o Check the power source to see if a fuse has blown
or if the circuit breaker tripped.
o Check power supply.
" Cooktop pane[ is locked. Touch and hold PANEL
LOCK pad until indicator light turns off.
o The scraper is packaged with single-edge, stainless
steel blades. Use a standard single-edge blade for
replacement.
° The cooktop is not level.
° Cooking pan does not fit the surface being used.
o Cookware is not the type or size recommended.
A back-up dial is packaged with the cooktop. If an
additional dial is required, ca[[ 1-800-944-2904 and
order replacement part #5060003783.
HOW TO OBTAIN SERVICE
CaM: For authorized service or parts information, call 800/944-2904. We want you to remain a satisfied
customer. If you have any questions or concerns, please let us [<now.
Write: BSH Home Appliances Corp., Customer Support, 5551 McFadden Avenue, Huntington Beach, CA
92649. Whether you write or call, please provide us with the model number, serial number and date of
original purchase or installation.
PAGE II