Table of Contents
Advertisement
unIDen GuarDIan LuLLaBoo FIrmWare
Your baby monitor uses Uniden Guardian Lullaboo firmware to operate a series of screens that
lets you choose groups of operations. For example, when you tap on the camera icon in the Pop
Up menus, you can set how you want the main viewing screen - called the live screen - to display
images from the paired cameras. You can scan between cameras, show all cameras on a single
screen (Quad view), or only display a specific camera.
The live screen lets you view the camera transmissions. It also lets you set up your screen display
and make adjustments to it. Icons on the screen itself let you monitor power and camera status.
Lullaboo's firmware always defaults to the Live screen in Quad mode after being idle for
2 minutes while in any other system screen. This default ensures that the system is ready
to record video even if you forget to return to the Live screen. The system can only start a
recording while in Live screen mode.
LIVe sCreen
Battery
SD card
status
status
Pop up
menus
oPeratIon oVerVIeW
Internet
connection
status
Pop up
menu tab
Camera number/
Record
Signal strength
status
Motion
status
11
Advertisement
Table of Contents
