Computer 1 Component Command; Auto Pc Adj. Command; Presentation Timer Command; Presentation Timer (Exit) Command - Sanyo PLC-XD2200 - XGA Able Multimedia Projector Manual

PLC-XD2200 / 2600 Basic Serial Command Specifications

6.52. Computer 1 Component Command

Command "C54" [CR]
Select Component input in Computer 1.
Detail Although projector returns "OK", Input search is not executed with this command
while Input search is set to On1 or On2,
Acceptable
Response
Unacceptable

6.53. AUTO PC ADJ. Command

Command "C89" [CR]
Execute Auto PC Adj. function.
This command operates the same as "AUTO PC ADJ." of main menu.
Detail
Projector suspends Auto PC Adj. operation when receiving this command another
time.
Acceptable
Response
Unacceptable

6.54. PRESENTATION TIMER Command

Command "C8A" [CR]
Execute Presentation Timer.
Detail
This command works the same way as "P-TIMER" button of the remote control.
Acceptable
Response
Unacceptable

6.55. PRESENTATION TIMER (Exit) Command

Command "C8B" [CR]
Exit Presentation Timer menu.
Detail This command works the same as holding on the "P-TIMER" button of the remote
control
Acceptable
Response
Unacceptable
6.56. KEYSTONE ↑Command
Command "C8E" [CR]
Detail Correct keystone distortion by reducing upper part of image.
Acceptable
Response
Unacceptable
6.57. KEYSTONE ↓Command
Command "C8F" [CR]
Detail Correct keystone distortion by reducing down part of image.
Acceptable
Response
Unacceptable
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
18/23