Computer 1 Scart Command; Computer 1 Component Command; Page Up Command; Page Down Command - Sanyo PLC-XU305A - 3000 Manual

PLC-XU305A/355A Basic Serial Command Specifications

6.53. Computer 1 Scart Command

Command "C51" [CR]
Select Scart input in Computer 1
Detail Although Input search is set to On1 or On2, Input search is not executed with this
command while projector returns "OK".
Acceptable
Response
Unacceptable

6.54. Computer 1 Component Command

Command "C54" [CR]
Select Component input in Computer 1.
Detail Although Input search is set to On1 or On2, Input search is not executed with this
command while projector returns "OK".
Acceptable
Response
Unacceptable

6.55. PAGE UP Command

Command "C59" [CR]
Detail Send the signal "Page Up" to PC when PC is connected to projector through USB.
Acceptable
Response
Unacceptable

6.56. PAGE DOWN Command

Command "C5A" [CR]
Send the signal "Page Down" to PC when PC is connected to projector through
Detail
USB.
Acceptable
Response
Unacceptable

6.57. Computer 2 DVI (PC Digital) Command

Command "C5B" [CR]
Select DVI input (PC Digital) in Computer 2
Detail Although Input search is set to On1 or On2, Input search is not executed with this
command while projector returns "OK".
Acceptable
Response
Unacceptable

6.58. Computer 2 DVI (AV HDCP) Command

Command C5C" [CR]
Select DVI input (AV HDCP) in Computer 2
Detail Although Input search is set to On1 or On2, Input search is not executed with this
command while projector returns "OK".
Acceptable
Response
Unacceptable
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
20/26