Remote Control Operation - Sanyo PLC-WR251 - True WXGA Projector Owner's Manual

Remote Control Operation

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and
COMPONENT buttons
Press the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and
COMPONENT buttons on the remote control to select the
input source. See pages 27-28,37-38 for details.
FREEZE button
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
INFO . button
Display the input source information: Input , H-sync freq .,
V-sync freq ., Screen, Language, Lamp status, Lamp
counter, Power management, Keylock, PIN code lock
and Remote control (p.60).
D .ZOOM buttons
Press the D.ZOOM buttons on the remote control to enter to
the Digital zoom +/– mode. See page 36 for details.
LAMP button
Press the LAMP button on the remote control to select the
lamp mode for changing the brightness on the screen.
Normal ....... Normal brightness
Eco ............ Lower brightness reduces the lamp power
consumption and extends the lamp life.
PIP button
Press the PIP button on the remote control to enter P in P
or P by P.
Mode of Picture in Picture and input source will be
displayed on the main picture and input source will be
displayed on the sub picture for 10 seconds.
See page 51 for details.
Remote Control
COMPUTER 1/2
buttons
VIDEO
button
FREEZE
button
D .ZOOM
buttons
Note:

See the next page for the description of other
buttons.
Basic Operation
HDMI
button
S-VIDEO
button
COMPONENT
button
INFO .
button
LAMP
button
PIP button
25