Information; Input Source Information Display - Sanyo PLC-WR251 - True WXGA Projector Owner's Manual

Information

Input Source Information Display

The Information Menu is used for checking the status of the image signal being projected and the operation of the projector.
Direct Operation
Press the INFO. button on the remote control to display the
Information Menu.
Menu Operation
Press the Point
▲▼
Information Menu is displayed.
See below for displayed information.
Input
The selected input source is displayed.
H-sync freq .
The horizontal frequency of the input signal is displayed in
KHz, or - - - - - when no signal.
V-sync freq .
The vertical frequency of the input signal is displayed in Hz,
or - - - - - when no signal. Numbers of Hz doubles when
during Interlace.
Screen
The selected screen size is displayed.
Language
The selected language is displayed.
Lamp status
The selected lamp mode is displayed.
Lamp counter
The cumulative lamp operating time is displayed.
Power management
Off, Ready, Shut down or Timer is displayed.
Key lock
The selected Key lock icon is displayed.
PIN code lock
Off or On 1 or On 2 is displayed.
Remote control
The selected remote code is displayed.
60
buttons to select the Information. The
Remote Control
Information Menu
INFO . button
Hz