Apex Digital GT2415 Instruction Manual page 21

BASIC FUNCTIONS (continued)
General Operation (continued)
4) SCAN
(3) Press the SCAN button so that" Scan Off" appear on the screen.
(_Press the SCAN button again so that _Scan On _appear on the I
screen and the TV begins to scan from the current channel. [ Scan On
Note:
During scanning, pressing any button can interrupt scanning.
I
3. CCDiText switch
(_ Press theiSmS]button to display the current Closed Captions/Text mode on the screen.Press
the button again to display °CCDFrext Off" on the screen
4. TV/Video selection
VIDEO Press the VIDEO button, and the screen display changes in circular way:
i--) Video1 --) Video2 -_ Video3 -) S --) VHS -_ Channel Number "_1
/
To receive signals from external equipment, please be sure to select a corresponding Video mode.
Notes:
tn the Video mode, pressing the CH - ! + buttons can return to the TV mode.
5. Stereo selection
Q In the TV mode, the TV can automaticatly identify MTS stereo modes among Mono,
STEREO Stereo, SAP and SAP.
Press the STEREO button firstly to display the auto - identified MTS mode on the screen.
Press the button again before the OSD disappears to shift to other MTS mode as follows.
With Stereo/SAP signal received, you may select one of the SAP, Stereo and Mono
modes cyclically.
With Stereo signal received, you may select one of the Stereo and Mono modes cycli-
cally.
With Mono signal received, only Mono mode can be available.
21