Light Bulb Replacement - Amana MVH210E Use And Care Manual

Light Bulb Replacement
Cooktop Light,_ight Light
REMOVE SCREW
Oven Light
,_IL WARNING
To avoid the risk of burns or
electrical shock:
• Disconnect the electric current
to the appliance at the wall
outlet fuse or breaker box.
• Wait until the oven and/or light
bulbs are cool.
To replace combination cooktop
light/night light, first disconnect
power at main fuse or circuit
breaker panel or pull plug.
Remove screw on right side of
light compartment cover and lower
cover until it stops.
Be sure bulbs to be replaced are
cool before removing. Break the
adhesive seal by gently unscrewing
the bulbs. High intensity 40-watt
bulbs (40SllN/1), which are
available in supermarkets and
hardware stores, may also be
used for replacements. Raise
light compartment cover and
replace screw. Connect electrical
power to microwave oven.
,_ WARNING
To avoid the risk of burns or
electrical shock:
. Disconnect the electric current
to the appliance at the wall
outlet fuse or breaker box.
. Wait until the oven and/or light
bulbs are cool.
To replace your oven light, first
disconnect power at main fuse
or circuit breaker panel or pull
plug. Remove the top grill by
taking out the 2 screws that hold
it in place.
Next, remove the single screw
located above door near center
of oven that secures light housing.
Replace burned-out bulb with
a 30-watt incandescent bulb
(R0712011), available from
your Amana dealer. Secure
light housing with screw.
Clean off the grease and dust on
hood surfaces often. Use a solution
of warm water and detergent.
About 1 tablespoon of ammonia
may be added to the water. Take
care not to touch the filters and
enamel surfaces with this solution;
ammonia will darken metal.
23
u
n
Ii=,a e
¢b