Basic Operations - Aiwa CX-NA50 Owner's Manual

Toselect the25th track, press t he+10+10and 5 buttons.
Toselect the10th track, p ress t he+10and 0buttons.
4 Repeat steps 2 and 3 to program other tracks.
5 Press the _ _ button to start play.
To check the program
Each time the _4 or N_ button is pressed in stop mode, a disc number, track number, and program number will
be displayed.
To clear the program
Press the m CLEAR button in stop mode.
To add tracks to the program
Before playing, repeat steps 2 and 3. The track will be progralmned after the last progralmned track,
To change the programmed tracks
Clear the program and repeat all the steps again.
NOTE
During progralmned play, you cannot perform random play, check the remaining time, and select a disc or track.
I
BASIC OPERATIONS
• On deck 1, tapes are always played back on both sides.
• On deck 2, you can select a reverse mode to play back one or both sides.
• Use Type I (normal), Type II (high/CrOs)or Type IV 0netal) tapes for playback.
1 Press the TAPE button and press the _ EJECT mark to open the cassette holder.