Table Of Contents - Aiwa CX-NA50 Owner's Manual

- Avoid overloading ACpower plugs and extension cords b eyond t heircapacity, asthiscould result i nfireor shock.
4 Extension cord - To help prevent electric shock, do not use a polarized AC power plug with an extension cord,
receptacle, or other outlet unless the polarized plug can be completely inserted to prevent exposure of the blades of
the plug.
5 When not in use - Unplug the AC power cord form the AC power plug if the unit will not be used for several
months or more. When the cord is plugged in, a small amount of current continues to flow to the unit, even when the
power is turned off.
Outdoor Antenna
1 Power lines - When connecting an outdoor antenna, make sure it is located away froln power lines.
2 Outdoor antenna grounding - Be sure the antenna system is properly grounded to provide protection against
unexpected voltage surges or static electricity build-up. Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information on proper grounding of the mast, supporting structure, and the lead-in wire to the antenna
discharge unit, as well as the size of the grounding unit, connection to grounding terminals, and requirements for
grounding terlninals themselves.
Maintenance
Clean the unit only as recolrnnended in the Operating Instructions
Damage requiring Service
Have the units serviced by a qualified service technician if:
- The AC power cord or plug has been damaged
- Foreign objects or liquid have gotten inside the unit
- The unit has been exposed to rain or water
- The unit does not seem to operate normally
- The unit exhibits a marked change in performance
- The unit has been dropped, or the cabinet has been damaged
DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF
l
TABLE OF CONTENTS
PRECAUTIONS ......................................................... 1
PREPARATIONS
CONNECTIONS ....................................................... 3
REMOTE CONTROL ................................................... 5
BEFORE OPERATION ................................................. 5
SOUND
AUDIO ADJUSTMENTS ................................................ 6
GRAPHIC EQUALIZER ................................................ 6
RADIO RECEPTION
MANUAL TUNING .................................................... 7
PRESETTING STATIONS ............................................... 7
CD PLAYING
BASIC OPERATIONS .................................................. 9