Admiral AW-05CR1FHU Use And Care Manual page 11

Operating instructions /
Control Panel
You can easily operate this air conditioner by pressing relevant
button on the controm panel as well as the remote control,
(_) Button
The air conditioner will be started when it is energized or will
be stopped when it is in operation, if you press this button.
When the air conditioner is heating, allow 3 minutes after you
press this button.
Mode button
Each time Mode button is pressed, the operation
mode is changed in sequence:
5K. 6K. 8K cooling only, COOLING-*FAN ONLY
---*ENERGY SAVING -.-COOLING
8K with heater : COOLING_FAN ONLY_HEATING
-*ENERGY SAVlNG-*COOLING
Control Panel
NOTE: After setting the mode, allow 3 minutes before switching
to another mode.
In the FAN ONLY Mode, Room Temperature display range is
fromO°C(32T) to 38°C(99°F).
Room Temperature below 32T,the Temperature display L0.
Room Temperature above 99°F,the Temperature display H1.
Fan Speed button
Used to select fan speed in sequence auto, low, medium
and high (low and medium are in same fan speed).
Timer button
Used to set or cancel timer operation.
When the unit is in operation, you can set OFF TIMER.
When the unit is off, you can set ON TIMER.
Timer setting range is 0 to 24 hours.
If the OFF TIMER is set, the timer LED displays the
remaining time to turn off the unit for only 12 seconds,
then LED shifts to display set temperature. If you press
TIMER button within the 12 seconds, OFF TIMER will be
canceled.
indication symbols of LED on control panel :
@ Auto fan speed ._ Cooling
|--I |--I "F
Low fan speed _ Fan only
|_--|
I_I h
Display set temp
,_ Medium fan speed -)_i(-Heating Display set timer
_¢ High fan speed 4_ Energy-saving
(_ Timer
Above LED lights on when the relevant mode is in used.
If the ON TIMER is set, the timer LED displays the
remaining time to turn on the unit. If you want to cancel
ON TIMER, press TIMER button.
• • Button
Used to set room temperature in COOLING mode or used to set time in TIMER mode.
If the two keys are pressed at the same time, the temperature LED display will alternate between °Cand _I;'.
NOTE: Temperature setting range is from 19 °C(66°F) to 31 °C(88°F).
--10--