Setup Instructions; Set Up A Printer With A Mac; Figure 3-30 Mac Installation - Summary Screen - HP LaserJet Pro 400 Reference

16. When the installation completes, the Summary screen appears. To add the HP Ink Widget to
the dashboard, click the Add HP Ink Widget to Dashboard checkbox Click the OK button to
close the installer program.
Figure 3-30

Setup instructions

If you clicked the Skip Setup button during the initial installation process, you must set up the product
manually.
This section contains information about the following topics:
●

Set up a printer with a Mac

●
Troubleshoot the product setup
Set up a printer with a Mac
Complete these steps after completing the printing-system software installation.
1. If you are installing the product using a USB connection, verify the USB cable is connected
between the product and the computer. Turn on the product. If you are installing using a network
connection, verify that the network cable is connected to the product and that the product is on.
2. In the Applications folder (in the Finder utility), open the System Preferences folder, and then
open Printer & Fax.
142 Chapter 3 Mac software and utilities
Mac installation — Summary screen
ENWW