Calibrating Manually - Epson BrightLink 436Wi Manual

3. Select Auto Calibration and press Enter.
4. Adjust the focus if necessary, by sliding the focus ring.
5. Press Enter to select Yes.
A pattern appears then disappears, and the system is calibrated. If you see a message that
calibration failed, you need to calibrate manually.
The cursor location and pen position should match after calibration. If not, you may need to calibrate
manually.
Parent topic:

Calibrating Manually

If the cursor location and pen position do not match after auto calibration, you can calibrate manually.
Using the Pens
111