Using Pc Free Annotation; Built-In Tools For Use Without A Computer - Epson BrightLink 436Wi Manual

Using the Built-in Whiteboard Annotation Mode
Changing Pen Width and Color Using the Built-in Toolbar
Parent topic:

Using PC Free Annotation

You can use either pen with the built-in toolbar or both pens at the same time.
1. Press one of the Source buttons on the remote control to select the source for the image you want to
annotate. If you simply want to use a blank screen, press the Computer button and select
Computer2 or another unused source.
2. To activate the toolbar, tap the projection surface with the pen.
You see
Note: The toolbar arrows disappear if they are not used. To make them reappear, tap the projection
surface with the pen.
3. To display the toolbar, select one of the
Note: You can use the pen to move the arrows up or down.
4. To close the toolbar, select the
Note: If you want to hide the toolbar automatically after drawing, select the
toolbar.
Parent topic:

Built-in Tools for Use Without a Computer

The built-in toolbar is embedded in the projector and provides fewer functions than Easy Interactive
Tools. For example, you cannot save your work with the built-in toolbar. If you want to save, connect a
computer to the projector and use Easy Interactive Tools.
In the following illustration, the annotation mode tools are shown on the left, and the whiteboard
annotation mode tools on the right:
Using the Interactive Pens
arrow icons on the left and right side of the projected image.
icon at the bottom of the toolbar.
Using BrightLink Without a Computer
arrows.
142
icon at the bottom of the