Samsung PLH403W - PLH - 403W Instruction Manual page 21

Connecting S-VHS VCR
Your TV comes ready to receive high quality S-Video signals from an S-VHS VCR.
To begin, follow steps 1–3 in the
1
previous section to connect an
antenna or cable to your S-VHS
VCR and your TV.
Connect a set of audio cables
2
between the AUDIO OUT jacks on
the S-VHS VCR and the AUDIO
INPUT jacks on the TV. Make sure
the jacks you are using are under-
neath the number "1."
Connect an S-video cable between
3
the S-VIDEO OUT jack on the VCR
and the S-VHS INPUT jack on the
TV. (An S-video cable is usually
included with the S-VHS VCR.)
Connecting a Second VCR
Your TV can send picture and sound signals to a second, recording VCR. Refer to your VCR's instructions
for more information on recording with this kind of connection.
Connect a set of audio cables
1
between the AUDIO OUT jacks on
the TV and the AUDIO IN jacks on
the VCR. The VCR's input jacks
might be on the front or back of the
VCR.
Connect a video cable between the
2
VIDEO OUT jack on the TV and the
VIDEO IN jack on the VCR.
19