Samsung PCL6215R Instructions Manual page 17

INSTALLATION
]
Connect a coaxial cable r_[_lFI
betweentheANTENNA _1 I_
. Incoming
OUT terminal on the Cable g _ _
cable box and the B_IN Splitter RF(NB)
terminai on the A/B Cable Box Swffch
Connect another cable _
between the other OUT
terminal on the splitter Incoming
and the A* IN terminal on ¢,a_D Splffler RF(A/B)
the RF(A/B) switch. _ble Box sw_h
Connect the last coaxi_
cable between the OUT Incoming
terminal on the RF(A/B) Cable
switch and the VHF/UHE
terminal on the rear of
the TV.
Cable Box
After you've made this connection, set the A/B switch to the "A" position fur normal view
ing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the
A/B switch to "B," you will need to tune your TV to the cable box_ output channel, which is
usually channel 3 oi- 4.)
(} l,\P] 1%%( ) ]NSIAI AII( )N 2,4