Samsung PCL6215R Instructions Manual page 11

Your NEw TV ]
Rear Panel Jacks
Use the zear parle] jacks to connect an A/V component that will be connected conthlu
ously, such as a VCR or a DVD player.
Because theze are two sets of inputjacks, you can connect two different A/V components
(i.e., a VCR and a DVD, 2 VCRs, etc.)
For more inf_rmation oil connecting equipment, see pages 2.1 2.8.
\
() ANTENNA terminals 0
Two independent cables or antennas can be
connected to these terminals, Use ANT-A and
ANTB terminals to receive a signal from
VHHUHF antennas or your cable system. Use
the ANTA OUTterminal to send the signal being
received by the ANnA terminal out to another
component (such as a Cable Set Top Box), The O
PiP channel can be received only when a signal
source is connected to ANT A.
O
O
S-VIDEO INPUTjack
Connect t o an S VHSVCR or DVDplayer,
VIDEO INPUTjacks
Connect to the video output jacks of VCRs, DVD
players and similar devices (Two sets are avail
abie: Video1 and Video2),
O AUDIO INPUTjacks
Connect to the audio outputjacks of VCRs, DVD
players and similar devices.
AUDIO-VIDEO MONITOR
OUTPUT jacks
Connect to the audio/video input jacks of a
recording VCR,
Note: The monitor out does not operate in DVD
or DTV mode.
O
O
COMPONENT 1(480i, 480p)
INPUT jacks
Connect a sourcethatoutputs480i/480p Y .P,and
P_signals,suchas aDVDPlayer.
COMPONENT 2(480p, 1080i)
INPUT jacks
Connect a sourcethatoutputs480p/t080i Y .P,_
andP_ signals,suchasa DTVSet:fop Box.
SURROUND OUT
Connects to a (optional) rear surround amp:
Surround Left, Surround Right and Center.