Connecting A Camcorder - Samsung PCJ533R Owner's Instructions Manual

I
N S TA L L AT I O N

Connecting a Camcorder

The front panel jacks on your TV make it easy to connect a camcorder to your TV. They
allow you to view the camcorder tapes without using a VCR. (Also see "Viewing a VCR or
Camcorder Tape" on page 3.14)
1
Locate the A/V output
jacks on the camcorder.
They are usually found
on the side or back of
the camcorder.
2
Connect an audio cable
between the AUDIO
OUTPUT jack on the
camcorder and the
AUDIO terminals on the
front of the TV.
3
Connect a video cable
between the VIDEO
OUTPUT jack on the
camcorder and the
VIDEO terminal on the
front of the TV.
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
This figure shows the Standard Connector-jack panel. The actual configuration on your
TV may be different, depending on the model.
Camcorder
Output Jacks
OUTPUT
AUDIO VIDEO
Camcorder
Output Jacks
OUTPUT
AUDIO VIDEO
Audio Cable
Camcorder
Output Jacks
OUTPUT
AUDIO VIDEO
Y-Connector
Video Cable
C
HAPTER
TV Front Panel
Input Jacks
TV Front Panel
Input Jacks
2.7
T : I
WO NSTALLATION