Kyocera ECOSYS FS-C2126MFP Operation Manual page 412

LDAP Security
Specify the protocol to be used for LDAP. The default setting is Off.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System
Login User Name: L b
*******************
Login Password:
System:
1
*********************
Network Setting
2
I/F Block Set.
3
Security Level
Network Setting: a b
7
*********************
Secure Protocol
8
Host Name
9
LAN Interface
9
10
1
[ Exit ]
[ Login ]
2
a b
[ Exit ]
3
4
[ Exit ]
5
8-164
Default Setting (System Menu)
Press the or key to select [HTTP/HTTPS] or
[HTTPS only].
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
The System menu appears.
Press the or key to select [Network Setting].
Press the OK key. The Network Setting menu
appears.
Press the or key to select [Secure Protocol].
or