Original/Paper Settings - Kyocera ECOSYS FS-C2126MFP Operation Manual

Original/Paper Settings

Register additional types and sizes of originals and paper.
Custom Original Size Setup
Set up frequently-used custom original size. The dimensions available are as follows.
The table below lists the sizes that can be registered.
Inch models
Metric models
Use the procedure below to set a custom original size.
Sys. Menu/Count.: a b
4
User/Job Account
5
User Property
6
*********************
Common Settings
Common Settings: a b
1
*********************
Language
2
Default Screen
3
Sound
Orig./Paper Set.: a b
1
*********************
Custom Orig.Size
2
Def. Orig. Size
3
Custom PaperSize
Input units
X: 1.97 to 14.02" (in 0.01" increments)
Y: 1.97 to 8.50" (in 0.01" increments)
X: 50 to 356 mm (in 1 mm increments)
Y: 50 to 216 mm (in 1 mm increments)
[ Exit
[ Exit
[ Exit
5
Press the
brightness from [Darker -3] to [Lighter +3].
6
Press the OK key. Completed. is displayed and the
screen returns to the Common Settings menu.
Dimensions
1
In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
]
2
Press the OK key. The Common Settings menu
appears.
]
3
Press the
4
Press the OK key. The Orig./Paper Set. menu
appears.
]
5
Press the
8-8
Default Setting (System Menu)
or key to select the display
or key to select [Orig./Paper Set.].
or key to select [Custom Orig.Size].
or