GE Model 591 Owner's Manual page 19

Possible Causes What To Do
Static occurs No fabric softener was used * T U a lid)tic sotiener.
• Bounce (' Fabric Conditioner Duer Sheets have
been appr_)ved ti)r use in all (;E Dlyers when used in
accordance wi/h/he manuLicmrer's insmwfions.
Overdrying
• T U a tilbric softener.
•
At!jusl
con/rols ii)r less (h)_ing.
Synthetics, permanent press and • Try a fabric sof/ener,
blends can cause static
Collars and waistbands The dryness monitor senses that • Choose SPEEDDRY to (hy damp collars and w;fistbands.
Mill wet at end of cycle the body of the clothes is
dry
In the fimne, when &ying a load with collars and
waistbands, ( hoose MOREDRY,
Clothes take too long
Improper sorting
• Sepma/e hemy items flom liglmveight items (generally,
to dry
a well-sor/ed washer load is a well-sorted (hyer load).
Large loads of heavy fabrics (like
beach towels)
Controls improperly set
Lint filter is full
Improper or obstructed ducting
• I_mge, hemy tabrics contain more moisture and take
longer to &y. Separate large, hemy tilbrics into smaller
loads m speed duing time.
• Match conuol settings to the load you are duing.
• (lean lint fiher befi)re eveU load.
• Check ins/allation instructions fi)r proper
ducting/venfing.
• Make sure ducting is clean, flee of kinks and
unobstructed.
• (heck u) see if ou/side wall dmnper opera/es easily.
• (heck the Installation Instructions to make sure the &yet
venting is correct.
Blown fuses or tripped circuit • Replace fi_ses or reset circuit breakers. Since most
breaker duets use 2 fi_ses/breakers, make sure both are
operating.
Overloading/combining loads • Do not put more than one washer load in the &yet at
a/ilne.
Underloading • If y_)u _ue (hying only one or/wo items, add a tew items to
ensure proper rambling.
19