Table of Contents
Advertisement
Available languages
Available languages
About controls features.
START/PAUSE
[] Press twi(e to select the last (y( ]e you used and start tile dryer.
[] If you have sele(ted
a new cycle, press
once
to start the cycle.
[] If the (hTer is running,
press
on(e
to interrupt
the (y( le; press again
to (ontinue
the (y( le.
STOP/CANCEL
[] This pad should
notbe
used to interrupt
or pause
a (y(le.
[] Pressing
this pad will (an(el
the (urrent
settings
and the settings
-,,,ill be lost.
EST.TIbK REMAINING
Estimated Time Remaining
Ea(h
time the dxTer is used,
it "learns"
v, hat types of loads you dry most
oiien.
It takes
this data and determines
the approximate
time it ",*,,ill take the load to dry.
As the cycle begins, you will see the approximate
total cycle time in the display.
Then "racetrack
lights" will flash in the display, in a clockwise direction,
and the
SENSING light will flash. This means the duer is ( ontinuously
monitoring
the amount
of moisture
in the load. The racetrack
lights will ( ontinue until the dryer senses a low
level of moisture
in the load. At that point, the dryer will cal(ulate
and display the
approximate
time remaining.
l0
Advertisement
Table of Contents
