About Controls Features; Time Remaining - GE Profile DPSB620 Owner's Manual

About controls features.
Throughout this manual, features and appearance may vary from your model.
START
• After wm have selected a new cycle, press once to start the cycle.
• Press twice to select the last cvcle used and start the dryer.
• If the drver is _unning, press once to interrupt the cycle; press again to continue
the cycle.
STOP
It the dr_er is running,, press once to inteHupt the Qcle; I)ress_ aoain_ to cancel the cycle.
TIME REMAINING
I
Time Remaining
Displa):_ the approximate time remaining tmtil the end of the cycle.
As the cycle begins, you will see the approximate total cvcle time in the display. Then
lights will "race" in the display. This means the (hyer is continuously monitoring the
amount of moisture in the load. The
lights
will continue until the drver senses a low level
of moisture in the load. At that point, the dryer will calculate and display the approximate
time remaining.
/2