GE Model 20 Owner's Manual And Installation Instructions page 8

About the shelves and bins.
Not all features are on all models.
o 0
Somemodelshavewire shelvesthat
can be adjustedin thesamemam?e_
Rearranging the Shelves
Shel;es in the refrigerator cOn_l)artment are a(!iustable.
Refrigerator Compartment
Toremove:
0
Tilt the shelf up at the fl'ont.
0 I,ifl the shelf u l) at the back and
bring the shelf ()tit.
Toreplace:
0 _'_hile tilting the shelf up, insert the top
hook at the back of the shelf in a slot
(m the track.
0 I,ower the fl'ont of the shelf until the
bottom of the shelf locks into place.
i 0
Spillproof Shelves (onsomemodels)
Spillproof shelves have special edges to
hel I) prevent spills fl'om dripping to lower
shelves. To relnove or rel)la('e the shelves,
see Rearranging the Shelves,
Slide-Out Spillproof Shelf (onsomemodels)
The slide-out spillproof shelf allows you
to reach items stored behind otheis. The
spedal edges are designed to hel I) prevent
spills from dripping to lower shelves.
Toremove:
0 Reinove all items from shell
0 Slide the shelf ()tit until it stops.
Lift the fl'ont edge of the shelf until the
central tabs are above the fl'ont bin:
0 Continue pulling the shelf fi)rward
until it can be removed.
Toreplace:
0 Place the rear shelf tabs just in fl'ont of
the central notches on the shelf fl'ame,
Slide the shelf in un61 the central tabs
are slightly behind the fl'ont bar.
0 i,ower the shelf into place until it is
horizontal and slide the shelf in.
Make sure that the shelf sits flat after reinstallation
and doesn't move freely from side to side.
Make sure you push the shelves all the way in
before youclose the door
8