External Features; Port Connectors - D-Link DPR-1061 Manual

Usb 2.0 mfp server
Table of Contents

Advertisement

External Features

Port Connectors

The DPR-1061's three printer ports are located on its rear panel. Two USB and one
parallel ports are labeled USB1, USB2, and LPT. These printer ports are
independently configurable using the Web Configuration Interface. The Print
Server's Web configuration permits users to configure settings through the web
browser.
Default IP Address of DPR-1061 is set as automatically getting from DHCP server or
Router which build-in DHCP server.
NOTE: The PC's IP Address must be in the same subnet as the Print Server's IP
Address for the two devices to communicate. (For example, if MFP server's IP
Address is 192.168.0.10, with a subnet mask of 255.255.255.0, then your
computer's IP Address should be 192.168.0.x, where x is a value between 1-254,
excluding 10.)
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents