External Features - D-Link DP-300+ Manual

Multi-port ehternet/fast ehternet print server

Hide thumbs Also See for DP-300+:

Table of Contents

External Features

Port Connectors

The DP-300+'s three printer ports are located on its rear panel. Two identical parallel

ports are labeled LPT1 and LPT2; the single serial port is labeled COM. These

printer ports are independently configurable using the PS Admin program or the print

server's telnet interface. (See the Print Server Administration User's Guide for infor-

mation about configuring the print server's ports.)

The print server also supports web configuration permitting users to configure set-

tings through the web browser. DP-300+ default IP address as follows:

Default IP address – 192.168.0.10

Subnet Mask – 255.255.255.0

Note:

The PC's IP address must correspond with the print server's IP address in the

same segment for the two devices to communicate.

Note:

The PC's IP Address must be in the same subnet as the Print Server's IP Address for the

two devices to communicate. (For example, if your Print Server's IP Address is 192.168.0.

10, with a subnet mask of 255.255.255.0, then your computer's IP Address should be 192.

168.0.x, where x is a value between 1-254, excluding 10.)

Table of Contents