Service And Repairs; Problem Solving List - Hayward SwimClear™ Owner's Manual

SERVICE AND REPAIRS

Consult your local authorized Hayward dealer or service center. No returns may be made directly to the factory
without the expressed written authorization of Hayward Pool Products.
TOTAL ALKALINITY
CALCIUM HARDNESS
COMBINED CHLORINE
CHLORINE (STABILIZED)
CHLORINE STABILIZER
(Cyanuric Acid)
LOW WATER FLOW
REMEDY 1. Check skimmer and
pump strainer baskets for
debris.
2. Check for restrictions in
intake and discharge
lines.
3. Check for air leak in
intake line (indicated by
bubbles returning to
pool).
Page 9 of 12
SUGGESTED POOL CHEMISTRY LEVELS
pH

PROBLEM SOLVING LIST

SHORT FILTER CYCLES
1. Check for algae in pool
and super-chlorinate as
required.
2. Be sure chlorine and pH
levels are in proper range
(adjust as required).
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
SWIMCLEAR™ CARTRIDGE FILTER
7.2 to 7.8
80 to 120 ppm
200 to 400 ppm
.2 ppm Maximum
1.0 to 3.0 ppm
60 to 80 ppm
POOL WATER WON'T CLEAR UP
1. Check chlorine, pH and total
alkalinity levels and adjust
as required.
2. Be sure flow rate through
filter is sufficient.
3. Operate filter for longer
periods.
ISC2031 REV A