Overview; Cautionary Statements - Motorola SV-4250-P-1 - AirDefense Enterprise Appliance 4250 Quick Installation Manual

Appliance Quick Installation Guide
4
Sensor Information
• Assign an IP address, subnet mask, and default gateway to each sensor.

2.2 Overview

Getting started with AirDefense Services Platform appliance is an seven step process. Each step is
described in this book.
1. Install the ADSP appliance.
2. Power up the appliance.
3. Launch the Command Line Interface. (ADSPadmin)
4. Configure time settings. (TZ and Time)
5. Configure the IP address. (IP)
6. Install the ADSP Toolkit
7. Access the appliance GUI.

2.3 Cautionary Statements

CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
AirDefense highly recommends that you change all passwords at your
earliest opportunity.
There are no user-serviceable components inside the ADSP appliance.
Opening the chassis will void the warranty.
The recommended ambient operating temperature of the ADSP
appliance is 10ºC - 35ºC (50ºF - 95ºF). Installation in a closed or multi-
rack assembly may raise the immediate ambient temperature above
the average room temperature. Exercise due caution.
Provide adequate spacing above, below, and behind the ADSP
appliance, to allow proper air flow, and to prevent excessive heat
buildup.
Use only industry-standard mounting kits when installing the ADSP
appliance, as improper mounting may result in hardware failure and
hazardous conditions.