Using the Canon PIXMA
Wireless Setup Assistant
1. Click the access point name(s) in the Access Point window
(you will find the name(s) in "Detected Access Points"
2. Click the Network Key input box
3. Enter the network key by doing one of the following:
a. Right-click the mouse and select "Paste" from the
drop down menu.
b. Or, while holding the "Ctrl" key, press the "V" key
on your keyboard.
4. Click Connect. When access point names are the same, you
can select any one of them. The tool "Canon PIXMA
Wireless Setup Assistant" is launched.
When the setup is completed, the Setup Complete dialog is displayed.