Brother MFC 885CW - Color Inkjet - All-in-One Quick Setup Manual page 28

STEP 2
Installing the Driver & Software
10
Choose Wired Network Connection, and
then click Next.
11
After reading and accepting the ScanSoft™
PaperPort™ 11SE License Agreement, click
Yes.
12
The installation of ScanSoft™ PaperPort™
11SE will automatically start and is followed by
the installation of MFL-Pro Suite.
13
When the Brother MFL-Pro Suite Software
License Agreement window appears, click Yes
if you agree to the Software License
Agreement.
14
For Windows
users, when this screen appears, choose
Change the Firewall port settings to enable
network connection and continue with the
installation. (Recommended) and click Next.
26
®
XP SP2/Windows Vista™
If you are not using the Windows
the User's Guide for your software for information
on how to add the following network ports.
For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP
port 54926.
If you still have trouble with your network
connection, add UDP port 137.
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
Next.
This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically.
If your machine shows APIPA in the IP Address
field, click Configure IP Address and enter an IP
address for your machine that is suitable for your
network.
• If the machine is not yet configured for use on your
network, the following screen appears.
Click OK.
The Configure IP Address window will appear.
Enter an IP address for your machine that is
suitable for your network by following the on-
screen instructions.
15
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
Please wait, it will take a few seconds for all
the screens to appear.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
®
Windows
®
Firewall, see