Table of Contents
Advertisement
Overview of the DMC-1 Remote
• Fully backlit
• Pre-programmed for most brands of A/V
equipment
OFF Button
POWER Button
• Learns commands from your other remote
controls
• Macro feature lets you program a sequence
of control steps
1
• Operates up to ten components
• Does not lose programming memory when
2
changing batteries
Button Layout
Think of the Emotiva DMC-1 remote
3
3
control as ten remotes in one. There are
ten DEVICE buttons (five on either side of
the display) and each allows the remote to
4
6
operate one piece of equipment.
From the factory, the device buttons are
labeled: CD, TAPE, AUX, ZONE2, EMO, DVD,
5
VCR, SAT, TV and CABLE.
Only the EMO and ZONE2 buttons are
pre-programmed, and these allow the
7
remote to operate your DMC-1. The
remote can be set to operate your other
remote controlled equipment.
This is done in three ways from the hidden
SETUP menu:
1) Entering a code from the tables at the end
of this manual
2) Stepping through the codes
3) Learning from your other remotes
8
See Remote Setup on page 44 for more
details.
Page 37
Advertisement
Table of Contents
